MAXMEYER® Spot Blender Can 5421

Product Description

A convenient solution to achieve a seamless finish on clearcoat and direct gloss fade-out edges.

 

Features and Benefits

  1. Easy to use with very good wetting of the surface and fast flash off: Painter speed and confidence in
    the repair process
  2. Excellent melting of the overspray edge: Minimal polishing required, increasing productivity
  3. Ready-for-use: Applied direct to the fade out edge offering a high quality finish to the fade out process.

 

Product Code: 1.912.5421

1.912.5421.jpg
TDS MSDS

Application Process

 

HS CLEARCOATS - BLEND PROCESS

1) After normal application, the gun is arced away from the panel in the blend area leaving a fine, dry overspray edge.
2) Apply the Spot Blender Aerosol (or the Spot Blender through a spraygun) to the clearcoat edge, in light coats to melt the overspray edge. DO NOT apply heavy coats.
3) Allow the paint film to thoroughly cure.
4) Lightly polish the blend area with polishing compound (SPP1001), taking care not to polish through the blend. Finish with a finishing polish.

UHS DURALIT EXTRA TOPCOAT COLOURS - BLEND PROCESS

1) After normal application, the gun is arced away from the panel in the blend area leaving a fine, dry overspray edge
2) Apply a coat of UHS Clear over the colour edge. Use the same hardener in the clear that was used in the UHS colour. After normal application, the gun is arced away from the panel in the blend area, leaving a fine, dry overspray edge.
3) Apply the Spot Blender Aerosol ( or the Spot Blender through a spraygun) to the clearcoat edge, in light coats to melt the overspray edge. DO NOT apply heavy coats.
4) Allow the paint film to thoroughly cure.
5) Lightly polish the blend area with polishing compound (SPP1001), taking care not to polish through the blend.
6) Finish with a finishing polish.

 For additional information, consult technical data sheet 816V.